Table of Contents
Advertisement
YMGI: Your Modern Green Idea
BRIEF INTRODUCTION TO MINI SPLIT WALL MOUNT SYSTEM
Mini Split Wall Mount Systems are designed for high performance, easy installation and service. Each system consists of
one or several indoor units and one outdoor unit, which are connected by one set or several multiple sets of
interconnection refrigerant pipes and electric wires.
As shown in the following sample picture of outdoor unit, air is drawn through the coil from the rear side and then
discharged from the front side. In cooling mode, air passing through coil is heated; in heating mode, air passing through
coil is cooled.
Outdoor unit(s) provides the electrical and thermal power for the whole system. Electrical and thermal components such
as compressors, motors, heat exchange coils and others, are incorporated into the cabinet in an optimized order. They
can be either hung on the wall or installed on the ground. Once stacking or bracket kit is used, some outdoor units can be
stacked 2 or 3 units high, depending upon unit size and applications. Air is discharged horizontally, quietly and smoothly.
These units are a perfect fit in locations where installation and applications of general up-flow condensing units are
limited, such as apartments, condos, lofts, multi-families and high-rise buildings and others named or unnamed.
Indoor unit(s) delivers the thermal and acoustical comfort to the rooms. Air is drawn through the coil from the front or
topside and then discharged from the bottom. In cooling mode, air passing through coil is cooled; in heating mode, air
passing through coil is heated. Air is cleaned or treated by the built in filter (washable, enzyme, or electrostatic filter types
vary from model to model), before being delivered into the room, with more than enough comfort and care, at a wide angle
(swing or not, varies from model to model).
Apartments
Communication Stations
Homes
NOTE: This ductless system is not designed to be incorporated or used with ducted returns or discharge
tunnels. A single-zone unit SHOULD NOT be used for the cooling or heating load of more than one single story
room. Several single-zone ductless systems or multiple-zone ductless systems would be proper in this
application.
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
14
Advertisement
Table of Contents
