Table of Contents
Advertisement
Installation
Troubleshooting
Please complete the troubleshooting before calling for service as
user error or installation faults WILL NOT be covered under
warranty.
General troubleshooting
For all issues with the burners, please check the following items
first:
1. DO NOT cover any part of the cooktop with foil. As well as being
very dangerous, this can cause issues with burners not igniting
or burning incorrectly.
2. Make sure all parts of the burner referred to on page 6 are
clean and dry. Food particles or built up grime can block the flow
of gas.
3. Check the burner heads and caps are positioned correctly.
Compare each burner to the other burners. Check that the caps
are on the correct burner head and are sitting flat and even.
Both caps positioned correctly
OTHER IMPORTANT WARNINGS:
DO NOT leave cooking unattended. Fats or oils may catch fire if
overheated. Boil overs may cause damage to the cooktop if not
contained immediately.
Using pans which are too large for a particular burner may cause
higher temperatures on other surfaces such as control knobs.
Please see the sizing guide for pans on page 8.
The cap on the left is from
the wrong burner head
21
Advertisement
Table of Contents
