Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for BELLISSIMO HNTB64CE
Summary of Contents for BELLISSIMO HNTB64CE
- Page 1 Instructions for Use and Installation 60cm ceramic cooktop HNTB64CE...
-
Page 2: Table Of Contents
Contents For your safety .................... 3 Product overview ..................8 The control panel ..................8 Using the touch controls ................9 Choosing the right cookware ..............10 Using your hob ..................11 Locking the controls ................. 12 Using the timer ..................12 Cooking guidelines ................... -
Page 3: For Your Safety
SAFETY WARNINGS PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a properly earthed wiring system is essential and mandatory. - Page 4 according to these instructions for installation. • This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. •...
- Page 5 Hot Surface Hazard • WARNING: Accessible parts may become hot during use. Young children should be kept away • Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool. •...
- Page 6 stand, or climb on it. • Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • Do not leave children alone or unattended in the area where the appliance is in use.
- Page 7 • Care should be taken to avoid touching heating elements. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Page 8: Product Overview
1. 200mm, max.1800 W zone 2. 165mm, max.1200 W zone 3. 200mm, max.1800 W zone 4. 165mm, max.1200 W zone 5. Control panel HNTB64CE The Control Panel HNTB64CE 1. ON/OFF key 4. Child lock key 2. Power level selection key 5. -
Page 9: Using The Touch Controls
Before using your New Hob Read this guide, taking special note of the ‘Safety Warnings’ section. • Remove any protective film that may still be on your ceramic hob. • Using the Touch Controls The controls respond to touch, so you don’t need to apply any pressure. •... -
Page 10: Choosing The Right Cookware
Choosing the right Cookware Do not use cookware with jagged edges or a curved base. Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone. Always lift pans off the ceramic hob –... -
Page 11: Using Your Hob
Using your Hob To start cooking After powering on, the hob beeps once, all the indicators light up for 1 second then • go out, indicating that the hob has entered standby mode. 1. Touch the ON/OFF key, all the indicators show “– “ 2. -
Page 12: Locking The Controls
Locking the Controls (Child lock) You can lock the controls to prevent unintended use (for example children • accidentally turning the cooking zones on). When the controls are locked, all the controls except the ON/OFF key are disabled. • To lock the controls Touch the lock key. - Page 13 Using the Timer as a Minute Minder 1. Make sure the hob is turned on. And the heating zone section key is not activated (zone indication ‘-‘ is not blinking). Note: You can also set the minute minder whilst the cooking zone is on as long as the power level indicator is not blinking.
- Page 14 Using the timer to switch off one or more cooking zones Select the heating zone you wish to set the timer for. 2. Touch timer key, “00” will show in the timer display and the “0” will blink. 3. Set the time by touching “-” or “+” keys (e.g. 5) 4.
- Page 15 If the timer is set on more than one zone: When you set the timer for several cooking zones, red dots of the relevant cooking zones are indicated. The timer display shows the remaining time. The dot for the corresponding zone blinks. Note: You can check the remaining time for the other zones by touching the corresponding heating zone selection key.
-
Page 16: Cooking Guidelines
Cooking Guidelines ke care when frying as the oil and fat heat up very quickly, particularly if you’re using Boost. At extremely high temperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking Tips When food comes to the boil, reduce the power setting. •... -
Page 17: Heat Settings
For stir-frying 1. Choose a ceramic compatible flat-based wok or a large frying pan. 2. Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large quantities, cook the food in several smaller batches. 3. Preheat the pan briefly and add two tablespoons of oil. 4. -
Page 18: Care And Cleaning
Care and Cleaning What? How? Important! Everyday soiling on glass 1. Switch the power to the cooktop off. • When the power to the cooktop is (fingerprints, marks, 2. Apply a cooktop cleaner while the switched off, there will be no ‘hot stains left by food or non- glass is still warm (but not hot!) surface’... -
Page 19: Troubleshooting
Unsuitable, abrasive scourer or cookware’. Do not slide any cookware cleaning products being used. on the hob. See ‘Care and cleaning’. Technical Specification Ceramic Hob HNTB64CE Cooking Zones 4 Zones Supply Voltage 220-240V~ 50 Hz or 60Hz Installed Electric Power 6000W Product Size D×W×H(mm) -
Page 20: Installation
D(mm) A(mm) B(mm) X(mm) HNTB64CE 50 min Ensure the hob is well ventilated and the air inlet and outlet are not blocked. Ensure the hob is in good working order. Install Rangehoods and Exhaust Fans in accordance to the manufacturer’s instructions. - Page 21 A(mm) B(mm) C(mm) 600 min 50 min 20 min Air intake Air exit 5mm Before you install the hob, make sure that The work surface is square and level, and no structural members interfere with • space requirements. The work surface is made of a suitable material. •...
- Page 22 When you have installed the hob, make sure that The power supply cable is not accessible through cupboard doors or drawers. • There is adequate flow of air from outside the cabinetry to the base of the hob. • If the hob is installed above a drawer or cupboard space, a thermal protection barrier •...
-
Page 23: Electrical Connection
Cautions • The hob must be installed by a suitably qualified person. Please never conduct the operation by yourself. • The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers. • The hob shall be installed in a way that ensures correct ventilation and clearances. •... -
Page 24: Disposal
Warning! If the cable is damaged or needs replacing, this must be done by the • manufacturer or suitably qualified person. The installer must ensure that the correct electrical connection has been • made and that it complies with safety regulations. The cable must not be bent or compressed. - Page 28 READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this handout.
Need help?
Do you have a question about the HNTB64CE and is the answer not in the manual?
Questions and answers