Table of Contents
Advertisement
Installation
Building into kitchen benches
These hobs are designed for installation in kitchen benches. When
installed into a corner, the walls or panels above the benchtop
must be at least 155mm away from the edge of the hob to ensure
adequate air circulation to the burners.
The dimensions of each hob and installation openings are shown
in the illustrations included on the following pages.
base
Combustible Surfaces as per
AS/NZS 5601
Any adjoining wall surface
situated within 200mm from the
edge of any hob burner must be a suitable non-combustible
material for a height of 150mm for the entire length of the hob.
Install Range Hoods and Exhaust Fans in accordance with the
manufacturer's instructions, no closer than 600mm above the
highest part of the cooking surface for Range Hoods and 750mm
for Exhaust Fans.
13
Advertisement
Table of Contents
