Table of Contents
Advertisement
Installation
Technical data
Gas intake connection
·
· Electricity supply
Burner Type
Auxiliary
Semi Rapid
Rapid
Wok
Instructions for installation
This appliance shall be installed only by authorised persons and in
accordance with the manufacturer's installation instructions, local
gas fitting regulations, municipal building codes, electrical wiring
regulations, AS/NZS 5601 - Gas Installations and any other
statutory regulations.
Data Label - The Data Label is located on the bottom of the
appliance. A duplicate Data Label is supplied to adhere in an
accessible area next to the appliance or attach to the user manual.
This appliance is suitable for Natural Gas and ULPG; ensure that
the available gas supply matches the Data Label and the gas type
label.
Ventilation - Ventilation must be in accordance with AS/NZS5601-
Gas Installations. In general, the appliance should have adequate
ventilation for complete combustion of gas, proper flueing and to
maintain temperature of immediate surroundings within safe limits.
Before any procedure, it is important to check that the appliance is
DISCONNECTED from the electrical mains. The Manufacturer
declines all responsibility for any damage deriving from
installations in breach of the regulations in force or from failure to
comply with these installation instructions.
1/2" BSP
220-240V AC (50Hz)
Natural Gas
1.0 kPa
Nominal Gas
Injector
(mm)
Consumption
0.90
3.9 MJ/h
6.9 MJ/h
1.18
1.55
11.7 MJ/h
13.6 MJ/h
1.70
U
LPG
2.75 kPa
Injector
Nominal Gas
(mm)
Consumption
0.53
3.3 MJ/h
0.70
6.0 MJ/h
0.90
10.0 MJ/h
1.00
13.0 MJ/h
12
Advertisement
Table of Contents
