Table of Contents
Advertisement
21 TROUBLESHOOTING
Faults
Engine overheats
Malfunction indicator lamp
lights up yellow
Engine dies during the trip
ABS indicator lamp lights up
High oil consumption
212
Possible cause
Foam formation in cooling sys-
tem
Thermostat defective
Fuse 5 blown
Defect in radiator fan system
Fault in fuel injection system
Lack of fuel
Fuse 1, 3, 4, or 7 is blown
ABS fuse is blown
Large difference in wheel
speeds of the front and rear
wheels
Malfunction in ABS
Engine vent hose bent
Engine oil level too high
Action
–
Drain the coolant.
(
p. 184)
–
Fill/bleed the cooling system.
(
p. 185)
–
Check the thermostat.
–
Change the fuses of individual power
consumers. (
p. 171)
–
Check the radiator fan system.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Refuel. (
p. 100)
–
Change the fuses of individual power
consumers. (
p. 171)
–
Change the ABS fuses. (
–
Stop the vehicle, switch off the igni-
tion, and start it again.
–
Read out the ABS fault memory using
the KTM diagnostics tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
p. 168)
p. 196)
- Quick Links:
- Service
- Electrical System
Hide quick links:
Advertisement
Table of Contents
