14 WHEELS, TIRES
156
Main work
–
Check bearing
»
If the bearing is damaged or worn:
–
Change the bearing.
–
Check the rubber dampers
wear.
»
If the rubber dampers of the rear hub are damaged or
worn:
F00756-10
–
Change all rubber dampers in the rear hub.
–
Lay the read wheel on a workbench with the rear sprocket fac-
ing upwards and insert the wheel spindle in the hub.
–
To check the play
rotate the rear sprocket.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear
S00678-10
wheel
»
A
If play
–
Change all rubber dampers in the rear hub.
Finishing work
–
Install the rear wheel.
1
.
2
of the rear hub for damage and
A
, hold the rear wheel tight and try to
≤ 5 mm (≤ 0.2 in)
is larger than the specified value:
(
p. 152)