Harness; Handle - Efco SA 2700 BP Operator's Instruction Manual

ASSEMBLY

Harness

16
Correct adjustment of the harness makes it possible to balance
the tool correctly and set an appropriate height from the ground.
• Put on the harness and position the buckles (A, Fig. 19-20-21)
so that the machine is ideally balanced and at a suitable height

Handle

The handle can be adjusted to suit the operator's requirements,
by unscrewing the knob (B, Fig. 22) and moving the handle
forward or backward along the tube. Once the handle is suitably
positioned, screw down the knob (B).
17
18
19
21
en
20
22
11