Table of Contents
Advertisement
Quick Links
All rights reserved © 2016 SCOTT Sports SA
Distribution:
SSG (Europe) Distribution Center SA, P.E.D. Zone C1, Rue du Kiell 60, 6790 Aubange, Belgium
v6.1/30082016
WWW.SCOTT-SPORTS.COM
SCOTT Sports SA
Route du Crochet 17, CH–1762 Givisiez
Phone: +41 26 460 16 16 | Fax: +41 26 460 16 00
Email: scottsupport@scott-sports.com
SCOTT GENIUS LT
USER MANUAL 2016
W W W . S C O T T - S P O R T S . C O M
Advertisement
Table of Contents
Related Manuals for Scott Genius LT 2016
Summary of Contents for Scott Genius LT 2016
- Page 1 SCOTT GENIUS LT USER MANUAL 2016 All rights reserved © 2016 SCOTT Sports SA Distribution: SSG (Europe) Distribution Center SA, P.E.D. Zone C1, Rue du Kiell 60, 6790 Aubange, Belgium v6.1/30082016 W W W . S C O T T - S P O R T S . C O M WWW.SCOTT-SPORTS.COM...
-
Page 2: Table Of Contents
Set-Up Genius LT With FOX Nude Or FOX CTD Shock All adjustments should be done at the local SCOTT dealer or following to this manual. In order to avoid technical problems or any harm please contact Set-Up of Rebound FOX Nude Or FOX CTD Shock in case of doubts your authorized SCOTT dealer. -
Page 3: Genius Lt Concept
TWINLOC XL remote control. Shock length 217mm (Eye to Eye) SCOTT’s focus was not only on lightweight but also on a durable and stiff frame with an Hardware Mainframe 22 2mm x 8mm innovative suspension technology in combination with an optimized kinematics of the rear... -
Page 4: Tc Shock Technology/Twinloc Levers
“bobbing” and offers still optimum traction of the rear wheel. open mode at the same time when you change the modes on the SCOTT rear shox. In combination with FOX 34 CTD forks it is also possible to have a platform mode on For Ride: by adding a platform on the compression damping system the shock will not the fork. -
Page 5: Assembly Of The Remote Cable
FOX Nude with different rolls for FOX CTD fork and RockShox DNA 3 fork (SCOTT Article number: 230097) IMPORTANT! FOX CTD with different rolls for FOX CTD fork and RockShox DNA 3 fork (SCOTT Article Please make sure the lockout of SRAM/RockShox or FOX fork is activated after transport number: 230098) correctly. -
Page 6: Fox Nude Shock And Twinloc Remote Control Lever
• • FOX NUDE SHOCK AND TWINLOC REMOTE CONTROL LEVER BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF FOX NUDE SHOCK In the drawing of the shock and remote lever, shown below, you will see the parts indicated with numbers which will be used in the manual for the adjustment and setup. To ensure perfect function of the FOX Nude shock it is very important to follow the steps shown below exactly. -
Page 7: Recommended Tools For The Shock Set-Up
• BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF FOX 3. tighten the cable and fix the cablefixing screw CTD SHOCK (S7) by turning it clockwise with a 2mm allen key and a max. tightening torque of 1.6Nm. The assembly of the remote cable and the setup of the FOX CTD rear shock is very similar to the abovementioned assembly and setup of the FOX Nude. -
Page 8: Sag
• • SET-UP GENIUS LT WITH FOX NUDE OR FOX CTD SHOCK The Set-Up of the FOX Nude or FOX CTD Shock can be easy done within a few minutes. The SAG should be 18mm on the shock piston. To check the adjustment, please follow as shown below: 1. -
Page 9: Set-Up Of Rebound Fox Nude Or Fox Ctd Shock
By using the rebound adjuster knob (S4) you can adjust the rebound step by step. • SET-UP OF OTHER SHOCK MODELS SCOTT strongly recommends using only the FOX Nude (FOX CTD shock) with the Genius LT bike, as we designed both parts for a perfect matching combination with a linear suspension rate. -
Page 10: Headset Options
• • HEADSET OPTIONS BOTTOM BRACKET (BB) ON GENIUS LT Genius LT features a tapered headset and All frames of Genius LT (carbon and alloy) have a BB shell for BB92PF standard. fork steerer system to match with semi- The BB housing has actually a width of 89.5mm. integrated headsets of the “50-61”mm range with ID of Headtube of 44.0mm on top and 54.9mm on the lower end. -
Page 11: Adjustable Bb Height
This adapter can be ordered at the SCOTT distribution with parts number: 235277 FD mount plate Set Genius LT 700 2014 Please note that the adapter is not interchangeable! 1. -
Page 12: Chainguide
In addition to the chainblocker assembled on the Genius LT you also find a chainguide systems. mounting port below the chainstay. A set of all spare parts for this action can be ordered via the SCOTT distribution with: Both frame options, carbon and alloy, have the same feature. 229730... -
Page 13: Genius Lt Cable Routing
• GENIUS LT CABLE ROUTING Headtube section: BB section: The direct and straight cable system on all our full suspension models offers perfect shifting performance combined with lightweight and high resistance against water and dirt. CARBON FRONT FRAMES The carbon frames of Genius LT have an internal shifting cable routing with cable stops on the front end of the downtube as shown in the diagram. -
Page 14: Adjustment Of Seatpost-Height
Please make sure to respect the 40mm distance between the cables and the BB (bottom bracket) housing to avoid “ghost-shifting” and/or damages on the shift cables and brake hose. The cable guide can be ordered via the SCOTT distribution with parts number: 229723 BB Cable Guide Genius (f Carbon Frame) -
Page 15: Replaceable Dropout
If you have to change the bearings you can order them included in a service kit at your local wheelsets for the following parts via the SCOTT distribution: SCOTT dealer or buy them with international parts number as shown above in the specs list in a hardware store. -
Page 16: Warranty
Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely assembled bikes.