Filter Settings; Bus Diagnostic Function - Ebyte ECAN-U01S User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

7.5. Filter settings

Receive filter settings can set filter ID/ time / channel number / length / data, etc. If filter is set, the software will
only display the set filter conditions, and frames that are not within the filter range will be filtered out.
The demo is as follows:

7.6. Bus diagnostic function

When a bus error occurs during the use of the device, the CAN1/CAN2 data light of the device will display a red
constant light display, and the red alarm will not disappear until the bus returns to normal. And the host computer
displays the number of error frames, as shown in the figure:
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
ECAN-U01S User Manual
14