Weslo FLEX 3.0 User Manual page 9

5. While a second person holds the Rail (4) near
the Frame (2), connect the Rail Wire (10) to the
Frame Wire (11). Insert the excess wire into the
Rail.
Tip: Avoid pinching the wires. Attach the Rail
(4) to the Frame (2) with an M8 Bolt Set (12).
Then, insert the Frame Pin (13) through the
indicated holes.
6. Insert the Axle (14) through the Frame (2) and
center it. Next, slide a Bushing (15) and a Pedal
(16) onto each side of the Axle.
Then, tighten an M8 Nut (17) and an M8 Washer
(24) into each end of the Axle (14) at the same
time.
7. Clip the Row Bar (18) or the Handles (19) to the
Bungee Cords (20).
5
12
Avoid
pinching
the wires
4
10
6
17
24
16
14
15
7
19
9
2
12
13
11
2
15
24
20
18
16
17