TP-Link tapo S505D User Manual page 8

Smart wi-fi light switch, dimmer

Hide thumbs Also See for tapo S505D:

Wire Your Switch

Step 1. Turn Off Power and Remove the Wallplate

Turn off

the circuit breaker. Then remove the old wallplate of the wall

switch and label the wires.

CAUTION

Risk of Electric Shocks - High Voltage - Disconnect power supply before servicing.

MISE EN GARDE

Risque d'électrocution - Haute tension. Débrancher l'alimentation électrique avant d'utiliser.

Step 2. Expose Your Switch Wiring

Remove the screws securing your old switch to the wall box. Gently

pull the switch out and disconnect wires from the old switch.

Step 3. Identify Line and Load wires

1) Turn on the circuit breaker. Use a voltage detector to identify the

energized wire

(Line

wire).

Line wire

Turn off

the circuit breaker. Label the

Load wire

Line

and

Load

wires.

Table of Contents