Advertisement
Quick Links
Advertisement
Related Manuals for VINGLI CD0BN4D
Summary of Contents for VINGLI CD0BN4D
- Page 1 ASSEMBLY INSTRUCTION COMPUTER DESK MODEL#:CD0BN4D CUSTOMER SERVICE Questions,Missing parts?Before returning it to our store, please contact us at Email: support@vingli.com or visit our website at www.vingli.com/pages/contact-us. Please attach your order id so we can assist you better.
-
Page 2: Parts List
ASSEMBLY>MANUAL support@vingli.com PARTS LIST When unpacking, please be careful not to discard any parts with the packaging. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and hardware. Compare with part list to be sure all parts are present. -
Page 3: Hardware List
ASSEMBLY>MANUAL support@vingli.com PARTS LIST 2 PCS 2 PCS 2 PCS 1 PC 2 PCS 2 PCS 2 PCS 2 PCS 2 PCS 1 PC 1 PC HARDWARE LIST M4×25mm 50 PCS M6×30mm 4 PCS 8 PCS M5×50mm 12 PCS 4 PCS... -
Page 4: Assembly Overview
ASSEMBLY>MANUAL support@vingli.com ASSEMBLY OVERVIEW ⑭ ⑱ ⑰ ⑪ ⑩ ⑲ ⑫ ⑬ ⑯ ⑫ ⑮ ⑨ ⑪ ⑧ ㉓ ㉒ ⑤ ② ⑦ ㉔ ⑥ ㉑ ⑳ ④ ㉕ ③ ㉓ ㉒ ㉕ ㉔ ㉗ ㉖ ㉑ ① "A" Hardware installation example Ⅰ... - Page 5 ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS STEP 1 Attach four adjustable foot pads(H) to legs(1)(27). ① ㉗ H×4 STEP 2 Attach part(3)(4) to bottom board(2) using bolts(I). Flip bottom board(2) after you finish this step,make sure bolts(I) are facing down the floor.
- Page 6 ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS STEP 3 Attach left drawer board(6),middle drawer board(7),right drawer board(8) to part from STEP 2 using bolts(J),make sure drawer rollers are close to the side of part(3). ④ ⑧ ⑦ ⑥ ③ J×6 STEP 4 Attach board(5) into part from STEP 3 by aligning the bolts and cams(A).
- Page 7 ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS STEP 5 Attach legs(1)(27) into part from STEP 4 using four bolts(E)&bolts(K). First,screw 2 bolts(K) from leg(1) to part(3)(4),screw 2 bolts(E) from leg(1) to board(5).Second,screw 2 bolts(K) from leg(27) to part(3)(4),screw 2 bolts(E) from leg(27) to board(5).
- Page 8 ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS STEP 7 Then,screw four bolts(B) from legs(1) into desktop(9). B×4 STEP 8 Screw three bolts(I) to attach parts(25) into part(1)(27)(4). ④ ㉕ ㉕ ① ㉗ I×3...
- Page 9 ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS STEP 9 First,screws four bolts(A1) into two boards(11).Second,attach boards(11) into board(10),insert four cams(A2) into board(10),make sure the arrows are facing the smaller holes which the bolts go into,with a screwdriver turn the cams about 1/2 turn clockwise to lock into place.CAUTION: Do not overtighten cams.
- Page 10 ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS STEP 11 Screws ten bolts(A1) into hutch top board(14) and make sure the bolts are tighten enough.Then attach hutch top into part from STEP 10.Insert twenty cams(A2) to boards(11)(12)(13),make sure the arrows are facing the smaller holes which the bolts go into,with a screwdriver turn the cams about 1/2 turn clockwise to lock into place.CAUTION: Do not overtighten cams.
- Page 11 ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS STEP 13 First,screws four bolts(A1) into drawer front board(20),attach drawer side boards(21)(22) to board(20) by aligning the bolts and cams(A). Second,insert drawer bottom (24) into grooves. Align groove in drawer back boards(23) with drawer bottom. Attach drawer back (23) to left and right drawer boards using four bolts (E).
-
Page 12: Assembly Steps
ASSEMBLY>MANUAL support@vingli.com ASSEMBLY STEPS -READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING. -SEPARATE,IDENTIFY AND COUNT ALL PIECES BEFORE BEGINNING INSTALLATION. -OPEN THE HARDWARE AS NEEDED -ASSEMBLE IN AN AREA WITH PLENTY OF SPACE. -READ EACH STEP BEFORE BEGINNING CONSTRUCTION. -NEVER FORCE THE SCREWS OR FITTINGS.
Need help?
Do you have a question about the CD0BN4D and is the answer not in the manual?
Questions and answers