Mounting The Wing - Carson Spy Hawk Sport 750 Instruction Manual

mountIng tHe wIng

Your model aircraft comes 90% preassembled from the factory. This
means you just need to carry out a few steps to finish building the
model.
1
Insert the left wing into the aeroplane's fuselage.
3
Now push the right wing onto the connecting rod and push it into
the fuselage.
GB // 22
Please note the following information and assemble the parts care-
fully and accurately. This is extremely important! Failure to observe
the instructions can adversely affect the flight characteristics.
2
Now push the connecting rod into the wing through the slit in the
fuselage.
4
Fix both wings using a little glue (not supplied). Assembly is now
complete.