Planet POE-1200G User Manual page 46

Object
• System PoE Admin Mode
• Power Supply
• Power Limit Mode
• Over Temperature
Protection
• Smart Fan
• Power Allocation
• Description
• PoE Function
• PoE Schedule
• Force Power
• Priority
Description
Allows user to disable/enable PoE function.
Displays PoE power supply status.
Allows user to configure power limit mode, which can be chosen.
Consumption: Based on the real device power consumption where PoE
power is delivered as system default setting is in this mode.
Classification: Based on port priority setting and device class where PoE
power is delivered.
Prevent system from being too hot that may cause damage. When PoE unit
temperature rises over the temperature threshold value, PoE power budget
will be reduced.
Please refer to the table below for knowing the OTP level:
POE-1200G POE-2400G HPOE-1200G HPOE-2400G
OTP1 NA
OTP2 NA
Display Smart Fan operation status.
Displays the current total power consumption status.
This function provides input per port description and the available letters is
30.
NOTE: The total maximum letters are only 800. Some of special words will
count as 5 per word, like ', ", \, < and
Allows user to disable or enable per port PoE function.
Indicates the scheduled profile mode. Possible profiles are:
 Profile1
 Profile2
 Profile3
 Profile4
Provide to disable or enable PoE Force mode.
The force power function will directly deliver power over UTP cable.
Please be careful when using force power function and make sure the
remote device is PoE powered device (PD).
Allows user to set PoE port priority. There are 3 levels that could be
configured and they are Critical, High and Low. The Critical is the highest
priority and Low is the lowest priority.
PSE > 70゜C
NA
=> 400W
NA NA
>.
PSE > 70゜C
=> 670W
PSE < 65゜C
=> 720W
PSE > 80゜C
=> 620W
PSE < 75゜C
=> 670W