Advertisement
Operation
User Modes:
Mode Name /Description
Change Celsius (
C) to Fahrenheit (
0
Disable/Enable Heat Options
Action (Actions cannot be input by remote control)
F)
0
Press both Temp down (
on the unit and hold until beep is heard and display
flashes. (To revert back to Celsius repeat this action)
Hold both Flame cycle (
on the product, for 5 seconds, when the heater has
been disabled the product will beep. This will disable
heat control functions on the product only. To enable
heat repeat this action. Note: the remote control will
still be able to operate heat functions.
) and Temp up (
)
) and Heat cycle (
),
13
Advertisement
