Looking Up Fru Information - Lenovo ThinkPad X1 Nano Gen 1 Hardware Maintenance Manual

Item Connector (location)
Speaker assembly (near
5
the built-in battery)
(internal)
2242 M.2 solid-state drive
6
slot (internal)
Built-in battery connector
7
(internal)
Trackpad, fingerprint
reader, and P-sensor
8
connector (internal)
Keyboard connector
9
(internal)
Thermal fan assembly
10
connector (internal)
P-sensor connector
11
(internal)
Wireless-WAN card slot
12
(internal)
Nano-SIM-card slot
13
(external)

Looking up FRU information

For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to
https://support.lenovo.com/partslookup
50
X1 Nano Gen 1 Hardware Maintenance Manual
Internal cable required
The speaker assembly comes
with the cable.
No
No
Trackpad, fingerprint reader,
and P-sensor cable
The keyboard and keyboard
bezel assembly comes with
the cable.
The thermal fan assembly
comes with the cable.
WWAN antenna assembly
comes with the cable.
No
No
.
Cable connection
The speaker assembly comes with the cable.
Connect the cable to this connector.
Insert an 2242 M.2 SSD into this slot.
Connect the built-in battery to this connector.
Connect one end of the cable to the system
board, one end to the trackpad, one end to the
fingerprint reader and the other end to the P-
sensor.
The keyboard and keyboard bezel assembly
comes with the cable. Connect the keyboard
cable to this connector.
The thermal fan assembly comes with cable.
Connect the cable to this connector.
The WWAN antenna assembly comes with the
cable. Connect the cable to this connector.
Insert a Wireless-WAN card into this slot.
Insert a nano-SIM card into this slot to
establish WWAN connection.