1060 Built-In Battery - Lenovo ThinkPad X1 Nano Gen 1 Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad X1 Nano Gen 1:
Table of Contents

Advertisement

Removal steps of the power button board
Step
Screw (quantity)
2
M2 × L2 mm, flat-head, nylon-coated (1)

1060 Built-in battery

Important notices for replacing a battery
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out of their use.
The Lenovo Solution Center program provides an automatic battery diagnostic test that determines if the
battery is defective. A battery FRU should not be replaced unless this diagnostic test shows that the battery
is defective. The only exception to this is if the battery is physically damaged or a customer is reporting a
possible safety issue.
If the Lenovo Solution Center program is not installed on the computer, the customer should download and
install the program to diagnose the battery, before getting a non-physically damaged battery replaced. Note
that the replacement of a physically damaged battery is not covered by the warranty.
For access, remove this FRU:
• "1010 Base cover assembly" on page 57
Removal steps of the built-in battery
DANGER
Use only the authorized battery specified for your computer. Any other battery could ignite or
explode.
62
X1 Nano Gen 1 Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)

Advertisement

Table of Contents
loading

Table of Contents