Flex OSE 80-2 Manual page 14

OSE 80-2 / ODE 100-2 / ORE 125-2
Integrated extractor with microfilter box
Push microfilter box all the way onto

the extraction nozzle.
To ensure optimum dust extraction, empty
the microfilter box in good time!
Regularly clean filter element.
Pull microfilter box with a twisting

movement off the extraction nozzle.
Remove cover (bayonet lock) and pull

out together with the filter element.
Tap filter element on a solid surface.

Clean fins with a soft brush.
Empty housing of the microfilter box.

Re-attach microfilter box.

Using an external extraction system
Connect extraction hose to the nozzle.

Follow the operating instructions for the dust

extraction system! Check the attachment!
If required, use an appropriate adapter.

NOTE
To prevent the power tool from sticking
to the surface of the workpiece, set the
suction power on the extractor to a corres-
pondingly low level.
Number of oscillations control
The thumb wheel can be used to steplessly
vary the number of oscillations from 1 (low)
to 6 (high) even while the power tool
is running.
As a result, the grinding speed can
be optimally adjusted to the particularly
material and the working conditions.
Switching on and off
Switch on the power tool (1.):
Press switch on I.

Switch off the power tool (2.):
Press switch on 0.

CAUTION!
Following a power failure, the switched-on
power tool will start running again.
15