Information On Run Channel; Information On Rtd Specification Error - LG MASTER-K G4F-TC2A User Manual

Chapter 6. BUFFER MEMORY CONFIGURATION AND FUNCTIONS
1) If a bit corresponding to each channel in Set Data specification area is turned On(1), then the RTD
input module executes the temperature conversion with user-defined setting data at the address 0 to 8
in the G3F-RD3A and at the address 0 to 4 in the G4F-RD2A.
2) If the bit corresponding to each channel is not turned On(1), then the RTD input module executes the
temperature conversion not with the new user-defined setting data at the address 0 to 8 in the G3F-
RD3A and at the address 0 to 4 in the G4F-RD2A but with the previous setting data.
3) The followings show the SET data specification
G3F-RD3A
G4F-RD2A
6.2.7 Information on Run Channel (G3F-RD3A : Address 34, G4F-RD2A : Address 18)
This area stores information on run status of each channel.
G3F-RD3A
G4F-RD2A

6.2.8 Information on RTD Specification Error

6 - 5