5. Uninstalling Driver
Note: Before removing the ATI video card, you must insure that the BIOS
PEG/Onchip setting is "Auto". Otherwise you will not be able to use the onboard
VGA video port, and will have no display device.
On the Advanced Chipset Features screen, set the PEG/Onchip VGA Control setting
to Auto.
From the "\Software_Support\TeamPoS36xx_Software_Support\ATI Video Card Driver",
run "AtiCimUn.exe".
Shutdown the system and remove the video card (Important: see BIOS note above).
Restart the system.
6. Troubleshooting Tips
If problems are encountered after following this install procedure –Run "AtiCimUn.exe"
from the "\Software_Support\TeamPoS36xx_Software_Support\ATI Video Card Driver"
folder. Restart Windows and repeat the complete install procedure.
TeamPoS36xx
ATI Video Card Installation
8