Short Connection; Timeout Restart - Ebyte ECAN-E01 User Manual

Hide thumbs Also See for ECAN-E01:

Table of Contents

成都亿佰特电子科技有限公司

ECAN-E01 用户使用说明书

data packet. The data of the registration package can be MAC address or user-defined registration data, wherein the

setting content of the user-defined registration package can be up to 128 bytes. Support custom registration

package;

Establishing a connection and sending a registration package is mainly used to connect to a server that needs to be

registered.

Data carrying registration package: Send data to access the registration package at the front end of the data, which

is mainly used for protocol transmission.

The registration packet mechanism is only applicable to TCP Client and UDP Client, and is invalid under TCP

Server and UDP Server.

4.2.3. Short connection

The use of TCP short connections is mainly to save server resources, and is generally used in multi-point-to-point

scenarios. Using short connections ensures that all existing connections are useful connections, and no additional

control means are required for screening.

The TCP short connection function is used in the TCP Client mode. After the short connection function is enabled,

the information is sent. If there is no data received from the serial port or network port within the set time, the

connection will be automatically disconnected. The short connection function is turned off by default, and the

disconnection time can be set after the function is turned on. The setting range is 2~255S.

The timeout restart (no data restart) function is mainly used to ensure the long-term stable operation of the

ECAN-E01. When the network port cannot receive data for a long time, or the network has not received data for a

long time, the ECAN-E01 will restart after the set time is exceeded. , so as to avoid the abnormal situation affecting

the communication. The timeout restart time can be set by the host computer. The normal working time of this

function is set to 60~65535S, and the default value is 300S. 0 is off, when the setting is out of range, it will return

to the default value.

Table of Contents