Mitsubishi Heavy Industries V Multi FDC71VNX Technical Manual page 406

'19 • PAC-T-327
Installation of the motion sensor
① Loosen the bolts which fix the panel, and make a gap between the panel and the indoor unit.
② Pass the wiring of the motion sensor through the opening of the panel.
③ Hang the wiring on the hook which is on the panel's inside.
④ Pass the wiring through the opening of the control box.
⑤ Connect the connecter to CNL(3P,Black) on PWB in the contorl box.
⑥ Tighten the bolts which fix the panel.
⑦ Install the motion sensor on the panel.
⑧ Fix the motion sensor by the screw.
⑨ Reinstall the control lid, and tighten 2 screws.
6
405
- -