Mitsubishi Heavy Industries V Multi FDC71VNX Technical Manual page 156

Inverter PCB
Power source for inverter PCB
Check that the voltage is discharged sufficiently.
Presence and shape of electric component may
*
vary according to model.
Remove the harness bands from control unit after
removing the harnesses from harness bands.
Remove the screws
Remove the screws
Fig.3 Target places where harness bands and screws are removed
Hole for harness clip installation
：Between T26 and T27
Fig.2 Voltage measurement points
T26
Fig.4 Fix the harness on the harness clip
155
- -
After elapsing 3 minutes
from power OFF
Presence and shape of electric component
*
may vary according to model.
T27
Presence and shape of electric component
*
may vary according to model.
'19 • PAC-T-327
Harness clip