Table of Contents
Advertisement
Quick Links
> INOX-STAR <
Safety instructions
This safety instruction/declaration of the manufacturer has to be
kept on file for the whole lifetime of the product.
Translation of the Original instructions
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
73428 Aalen
Tel. +49 7361 504-1370
Fax +49 7361 504-1171
sling@rud.com
www.rud.com
EG-Konformitätserklärung
entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen
RUD Ketten
Hersteller:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-
rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-
genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie
2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie
technischen Spezifikationen entspricht.
Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre
Gültigkeit.
_____________________________________________
_____________________________________________
Produktbezeichnung:
INOX-Star
Folgende harmonisierten Normen wurden angewandt:
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
_________________
Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, Funktion und Unterschrift Verantwortlicher
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
Eye bolts made out of
DUPLEX stainless steel
EC-Declaration of conformity
According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments
RUD Ketten
Manufacturer:
Rieger & Dietz GmbH u. Co. KG
Friedensinsel
73432 Aalen
We hereby declare that the equipment sold by us because of its design and construction,
as mentioned below, corresponds to the appropriate, basic requirements of safety and
health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below
mentioned harmonized and national norms as well as technical specifications.
In case of any modification of the equipment, not being agreed upon with us, this declara-
tion becomes invalid.
Product name:
_____________________________________________
_____________________________________________
INOX-STAR
The following harmonized norms were applied:
_________________
DIN EN ISO 12100 : 2011-03
_________________
_________________
_________________
_________________
The following national norms and technical specifications were applied:
_________________
BGR 500, KAP2.8 : 2008-04
_________________
_________________
_________________
_________________
Authorized person for the configuration of the declaration documents:
Michael Betzler, RUD Ketten, 73432 Aalen
_____________________________________________
Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)
Aalen, den 26.09.2016
Name, function and signature of the responsible person
EN
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
_________________
INOX-STAR
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RUD INOX-STAR
Summary of Contents for RUD INOX-STAR
- Page 1 _________________ _________________ _________________ _________________ Authorized person for the configuration of the declaration documents: Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Aalen, den 26.09.2016...
- Page 2 Intended use of INOX-STAR For steel of the strength S235JR (1.0037) or Cast iron GG 25 (0.6025 - without blowhole) the bolt The eyebolt INOX-STAR can be used as a lifting point length should be 1,5xM (=L). in general. When lifting light metals, nonferrous metals...
- Page 3 Three-/ Four strand (see also chart 2) • The INOX-STAR has to be adjustable through 360° when fitted and with key disengaged. Adjust to di- 5. Make sure that a plane bolting surface is provided rection of pull before attaching of the lifting mean.
- Page 4 Translation of the original instruction manual In case of doubts or misunderstandings, the German version of this document is decisive. RUD components are tested in accordance with DIN EN 1677, with a minimum of 20.000 load cycles at 1.5 x WLL.
Need help?
Do you have a question about the INOX-STAR and is the answer not in the manual?
Questions and answers