RUD VLBG-PLUS Translation Of The Original Instructions

Hide thumbs Also See for VLBG-PLUS:

Translation of the original instructions (12 pages)

Load ring for bolting

>VLBG-PLUS<

Safety instructions

This safety instruction/declaration of the manufacturer has to be kept on

file for the whole lifetime of the product.

– Translation of the Original instructions –

EG-Konformitätserklärung

entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen

RUD Ketten

Hersteller:

Rieger & Dietz GmbH u. Co. KG

Friedensinsel

73432 Aalen

Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-

rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-

genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie

2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie

technischen Spezifikationen entspricht.

Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre

Gültigkeit.

_____________________________________________

Produktbezeichnung:

Lastbock VLBG-PLUS

Folgende harmonisierten Normen wurden angewandt:

_________________

DIN EN 1677-1 : 2009-03

_________________

Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:

_________________

BGR 500, KAP2.8 : 2008-04

_________________

Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:

Michael Betzler, RUD Ketten, 73432 Aalen

_____________________________________________

Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)

Aalen, den 26.09.2016

Name, Funktion und Unterschrift Verantwortlicher

RUD Ketten

Rieger & Dietz GmbH u. Co. KG

73428 Aalen/Germany

Tel. +49 7361 504-1370

Fax +49 7361 504-1460

www.rud.com

sling@rud.com

_________________

DIN EN ISO 12100 : 2011-03

_________________

Load ring VLBG-PLUS

for bolting (ICE-PINK)

EC-Declaration of conformity

According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments

RUD Ketten

Manufacturer:

Rieger & Dietz GmbH u. Co. KG

Friedensinsel

73432 Aalen

We hereby declare that the equipment sold by us because of its design and construction,

as mentioned below, corresponds to the appropriate, basic requirements of safety and

health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below

mentioned harmonized and national norms as well as technical specifications.

In case of any modification of the equipment, not being agreed upon with us, this declara-

tion becomes invalid.

Product name:

_____________________________________________

Load ring VLBG-PLUS

The following harmonized norms were applied:

_________________

DIN EN 1677-1 : 2009-03

_________________

The following national norms and technical specifications were applied:

_________________

BGR 500, KAP2.8 : 2008-04

_________________

Authorized person for the configuration of the declaration documents:

Michael Betzler, RUD Ketten, 73432 Aalen

_____________________________________________

Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)

Aalen, den 26.09.2016

Name, function and signature of the responsible person

_________________

DIN EN ISO 12100 : 2011-03

_________________

VLBG-PLUS

Table of Contents

Need help?

Do you have a question about the VLBG-PLUS and is the answer not in the manual?

Questions and answers

Summary of Contents for RUD VLBG-PLUS

Page 1 _________________ _________________ _________________ _________________ Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Aalen, den 26.09.2016...
Page 2: Safety Instructions
Effects of temperature: • If the VLBG-PLUS is used exclusively for lashing, the Due to the DIN/EN bolts that are used in the VLBG-PLUS, value of the working load limit can be doubled. the working load limit must be reduced accordingly: LC = permissible lashing capacity = 2 x WLL -40 °C to 100 °C ––...
Page 3 1,25 x M in cast iron (for example GG 25) Inspection / repair). x M in aluminium alloys 2.5 x M in aluminium-magnesium alloys (M = diameter of RUD lifting point bolt, for ex. M 20) 3.3 User instructions • When lifting light metals, nonferrous heavy metals and gray cast iron the thread has to be chosen in such a 3.3.1 General information for the usage...
Page 4 • Keep in mind that the lifting means in the VLBG-PLUS 3.3.2 Allowed lifting and turning operations must be freely movable. Pic. 2: Use only suitable lifting means for hanging or hooking into the VLBG-PLUS • A bending load of the suspension ring is not permitted! Pic.
Page 5: Inspection / Repair
The following operations are forbidden: VLBG-PLUS M12-M48 WARNING HINT The turning of the VLBG-PLUS under load in Only the stated strength of class for the respec- the direction of the bolt axle (+15°) is forbidden. tive size of the bolts must be used! M12-M24: ICE-Bolt | M27-M48: 10.9...
Page 6 • Mechanical damage such as significant notches, parti cularly in areas subject to tensile stress. • Easy rotation of the VLBG-PLUS must be ensured Method of lift Number of legs 3 / 4 3 / 4 3 / 4 Angle of inclination <ß...
Page 7 [mm] [mm] Stand [mm] [mm] Standard Vario [mm] [mm] [mm] [mm] VLBG-PLUS 0.63t M8 0.63 30 Nm 8504651 8600470 VLBG-PLUS 0.9t M10 0.31 60 Nm 8504652 8600471 VLBG-PLUS 1.35t M12 1.35 0.34 150 Nm 8504653 8600472 VLBG-PLUS 1.2t M14 34.5...

This manual is also suitable for:

Vlbg-plus 0.63tVlbg-plus 0.9tVlbg-plus 1.35tVlbg-plus 1.2tVlbg-plus 2tVlbg-plus 3.5t ... Show all

RUD VLBG-PLUS Translation Of The Original Instructions

Table of Contents

Need help?

Questions and answers

Related Manuals for RUD VLBG-PLUS

Summary of Contents for RUD VLBG-PLUS

Page 2: Safety Instructions

Page 5: Inspection / Repair

This manual is also suitable for:

Table of Contents