Installing The Upper Handle - Toro 38371 Operator's Manual

Setup
Note:
Determine the left and right sides of the appliance from
the normal operating position.

Installing the Upper Handle

1. Remove the handle knobs, oval bolts, and curved washers
from the lower handle
1. Handle knob (2)
2. Curved washer (2)
3. Oval bolt (2)
2. Install the upper handle to the lower handle of the appliance
with the handle knobs, curved washers, and oval bolts as
shown in Figure 1.
Note:
Ensure that the power cord attached to the
appliance is routed over the lower handle and to the inside
of the handle assembly.
3. Tighten the handle knobs firmly by hand.
4. Attach the cord guide to the handle
(Figure 1).
Figure 1
4. Lower handle
5. Upper handle
(Figure 2).
1. Cord guide
2. Handle
g013476
4
Figure 2
3. Cord
g287698