Assembly Instructions - Stamina in TONE 35-1632B Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
WARNING
!
1. ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE inTONE®
REBOUNDER. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE
RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE
WHICH CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
2. Keep children away from the inTONE® Rebounder during assembly.
3. Keep fingers away from the ends of the rails in the hinge area when unfolding the inTONE®
Rebounder. The inTONE® Rebounder will snap into the unfolded position. Serious injury
can occur if fingers are caught between the ends of the RAILS.
4. The SAFETY PAD(6) must be installed before using the inTONE® Rebounder.
NOTE :
BEFORE
assembly, verify that the SECURE
PINS(10) are properly inserted into the Frame
Rail. The two protrusions must be assembled
inside the Frame Rail as shown in the SECTION
VIEW of the illustration. Otherwise, it could
damage the SECURE PINS(10) during Assembly
Step 2.
STEP 1
Lay the trampoline on the floor. The trampoline will appear as shown in illustration 1.
1.
7
SECTION VIEW
Secure Pin
Secure Pin
Frame Rail