Chevrolet Blazer Owner Manual (GMNA-Localizing-MidEast-16401983) -
2023 - CRC - 6/17/22
Lighting
Exterior Lighting
Flash-to-Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Interior Lighting
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Dome Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Reading Lamps . . . . . . . . . . . . . . . . . . . . . . . . . 119
Lighting Features
Exit Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Exterior Lighting
Exterior Lamp Controls
The exterior lamp control is on the
instrument panel to the left of the steering
column.
There are four positions.
: Turns the exterior lamps off and
deactivates the AUTO mode. Turn
to reactivate the AUTO mode.
AUTO : Turns the exterior lamps on and off
automatically depending on outside lighting.
: Turns on the parking lamps including
all lamps, except the headlamps.
: Turns on the headlamps together with
the parking lamps and instrument panel
lights.
IntelliBeam System
If equipped, this system turns the vehicle's
high-beam headlamps on and off according
to surrounding traffic conditions.
The system turns the high-beam headlamps
on when it is dark enough and there is no
other traffic present.
This light
comes on in the instrument
cluster when the IntelliBeam system is
enabled.
Turning On and Enabling IntelliBeam
again
To enable the IntelliBeam system, press
on the turn signal lever when it is
dark outside and the exterior lamp control is
in AUTO or
.
Lighting
115