Lighting - Chevrolet Colorado 2024 Manual

The system detects a preceding vehicle's
taillamps.
The outside light is bright enough that
high-beam headlamps are not required.
The vehicle speed drops below 20 km/h
(12 mph).
The high beams may not turn off
automatically if the system cannot detect
another vehicle's lamps because of any of
the following:
The other vehicle's lamps are missing,
damaged, obstructed from view,
or otherwise undetected.
The other vehicle's lamps are covered
with dirt, snow, and/or road spray.
The other vehicle's lamps cannot be
detected due to dense exhaust, smoke,
fog, snow, road spray, mist, or other
airborne obstructions.
The vehicle windshield is dirty, cracked,
or obstructed by something that blocks
the view of the light sensor.
The vehicle is loaded such that the front
end points upward, causing the light
sensor to aim high and not detect
headlamps and taillamps.
The vehicle is being driven on winding or
hilly roads.
The automatic high-beam headlamps may
need to be disabled if any of the above
conditions exist.
Hazard Warning Flashers
: Press to make the front and rear turn
signal lamps flash on and off. Press again to
turn the flashers off.
When the hazard warning flashers are on,
the vehicle's turn signals will not work.

Lighting

57