Huawei B593 Quick Start Manual page 55

LEDs (cont.)
1
MODE • White flashing light
• Blue light
• Green Llght
• Orange light
• Red light
• Purple light
LEDs for signal strength
2
Slot for SIM card
3
On/off switch
4
USB port
5
Socket for power cable
6
Port for telephone
7
Service not available in some countries.
Port for a computer or
8
network printer (LAN)
LED for LAN
9
*) The function is not activated in factory settings. The function is activated in the router's setup
management (see next spread) – read more under General settings and WLAN WPS.
= Connection being established
= Connected via 4G
= Connected via 3G
= Connected via 2G
= No connection to wireless network (WLAN).
= Problem with SIM card or PIN code
WPS button
10
After activating WPS (Wi-Fi Protected Setup) in
your router's setup management,* you can
connect computers to the wireless network with-
out a security key by pressing the WPS button.
Reset button
11
Press and hold down the button for more than
5 seconds to restore factory settings on your
4G router.
WLAN button
12
Press and hold down the button for 2–3 seconds
to activate/deactivate the WLAN function.
Flashes when data is transferred
55