Clean Water 7500-REV2.5 Installation Manual
Tannin filter
Hide thumbs
Also See for 7500-REV2.5:
- Installation manual (18 pages) ,
- Installation manual (20 pages) ,
- Installation manual (14 pages)
Related Manuals for Clean Water 7500-REV2.5
Summary of Contents for Clean Water 7500-REV2.5
- Page 1 Clean Water Made Easy www.cleanwaterstore.com 7500-REV2.5 Tannin Filter Installation Guide Rev031823...
-
Page 2: Table Of Contents
7500-REV2.5 Tannin Filter Installation & Startup Guide 7500-REV2.5 Tannin Filter Installation & Startup Guide Thank you for purchasing a Clean Water System! Table of Contents Please review this start-up guide entirely before beginning to install your system, and follow the steps outlined for best results. -
Page 3: Packing List
1. Review your packing list and make sure you have received all the parts before installation. 7500-REV2.5 control valve, brine tank, small tube of silicone grease, bypass valve, 1” pipe 2. If you are going to be turning off the water to the house and you have an electric water... -
Page 4: How The Bypass Valve Works
This entire automatic process, called ‘regeneration’ takes about 90 minutes. The 7500-REV2.5 Control Valve tracks the amount of water that is used and will backwash based on gallons OR every 7 days, whichever comes first. Installation of Your System in Copper... - Page 5 8. Lubricate the main tank O-ring with silicone grease and screw on the 7500-REV2.5 control valve carefully. Do not use pipe- joint compound, vegetable oil, Teflon tape, or Vaseline or other greases to lubricate tank threads.
-
Page 6: Programming Your Valve And Setting Time And Days For Backwash
7500-REV2.5 Tannin Filter Installation & Startup Guide 7500-REV2.5 Tannin Filter Installation & Startup Guide Programming Your Valve and Setting Time Set Time of Day and Days for Backwash 1. If LOCK icon is lit, press, and hold both UP and DOWN buttons for 3 seconds to unlock keypad. -
Page 7: Set Service Days
7500-REV2.5 Tannin Filter Installation & Startup Guide 7500-REV2.5 Tannin Filter Installation & Startup Guide Set Service Days Set for every 3 to 4 days. In some cases it may need to be Advanced Screen View Default Settings set to every 1 to 2 days. -
Page 8: 7500-Rev2.5 Water Conditioners Limited Warranty
9. Any product returned to Clean Water Store without a valid return authorization number will be rejected. Any product found to be defective will, at the sole discretion of Clean Water Store be repaired or replaced. Clean Water Store is not responsible for shipping cost to the repair facility.
Need help?
Do you have a question about the 7500-REV2.5 and is the answer not in the manual?
Questions and answers