Yamaha VIKING Owner's Manual page 158

7
1 2 3 4 5 6
1. Backup fuse "BACK UP" (for clock)
2. Ignition fuse "IGNITION"
8
3. Four-wheel-drive motor fuse "DIFF"
4. Auxiliary DC jack fuse "TERMINAL"
5. Signaling system fuse "SIGNAL"
6. Headlight fuse "HEAD"
7. Spare fuse (× 3)
8. Radiator fan fuse "FAN"
If a fuse is blown, replace it as follows.
1. Turn the key to "
electrical circuit in question.
8 7
" (off) and turn off the
NOTICE
To prevent accidental short-circuiting,
turn off the main switch when checking or
replacing a fuse.
2. Remove the hood. (See page 8-7 for
hood removal and installation proce-
dures.)
3. Remove the blown fuse, and then install
a new fuse of the specified amperage.
WARNING! Always use a fuse of the
specified amperage. Never use any
material in place of the proper fuse.
Using an improper fuse can cause
damage to the electrical system and
may lead to a fire.
8-48