Table of Contents
Advertisement
WOOFER DRIVER
For the bass register we selected a SEAS driver of the type coated paper,
a very well-tried type with an unbeatable relation between price/
performance.
The coated paper cone is extremely light but still extremely stiff and
effectively reduces resonances. The rubber surround makes sure that
no edge resonances are present.
The molded metal basket of "high flow" type that is acoustically
transparent and high precision since the basket is shaped exactly due
to molding. This makes sure that the basket is very stable and efficiently
reduces resonances. The basket is absolutely non-magnetic, which
contributes to a higher efficiency of the driver.
A strong magnet combined with the light cone yields a high efficiency
and a good transient response.
Large windows in the basket both above and below the spider reduces
sound reflection, air flow noise and cavity resonances.
CROSSOVER /
For the midrange and tweeter we have chosen a -12/18 dB crossover
BINDING POST
that has a fast transient response and a minimum of phase shifting.
The connectors are of a tri-wiring type so that you can connect to the
amplifier with double or triple cables (bi- or tri-wiring), or connect to
two or three amplifiers (bi- or tri-amping) to further improve the sound.
The following coupling modes are available:
1. Upper terminal + mid+ lower terminal (loops present) Default
2. Upper terminal. The signal is only fed to the tweeter.
3. Mid terminal. The signal is only fed to the midrange.
4. Lower terminal. Now the signal is fed to the woofer only. This gives
setting, the loudspeaker is fed with the entire frequency range.
Without the loop between upper and lower terminal:
the possibility of driving the basses with a separate amplifier.
6
Advertisement
Table of Contents
