Safety Information - 3M DIDF260-CL Installation And Operation Instruction Manual

Dual inlet dual flow manifold system

Table of Contents

Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3M

Water Filtration Products Dual Inlet Dual Flow Manifold System DIDF260-CL. Retain these instructions for future reference.

Intended use:

The Dual Inlet Dual Flow Manifold System DIDF260-CL is intended for use in filtering potable water for foodservice equipment and has not

been evaluated for other uses. The system is installed indoors, and must be installed by a qualified professional installer according to these

installation instructions.

WARNING

CAUTION

To reduce the risk associated with the ingestion of contaminants:

• Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA Establishment #070595-CT-001

To reduce the risk associated with choking:

• Do not allow children under 3 years of age to have access to small parts during the installation of this product.

To reduce the risk associated with hazardous voltage due to an installer drilling through existing electric or water pipes in the area of installation:

• Do not install near electric wiring or piping which may be in path of a drilling tool when selecting the position to mount the system bracket.

To reduce the risk of physical injury:

• Depressurize system as shown in manual prior to cartridge removal.

To reduce the risk associated with back strain:

• Follow safe lifting procedures.