Selecting Rf To Operate Your Devices - Philips TSU7500 User Manual

Selecting RF to Operate your Devices

1 Tap and hold the ProntoPro NG icon
touch screen for 3 seconds. The Tools Menu appears.
2 Tap
The 'RF IR Tool' screen appears.
3 Tap
The Device Overview appears.
4 Tap the Device for which you want to select RF.
The 'Select IR or RF' screen appears. By default IR is selected in the Sending
Signals list.
The Define RF button is disabled.
5 Choose RF in the Sending Signals list.
The Define RF button is enabled.
6 Tap
The 'RF Settings' screen appears.
7 Select the RF Channel in the RF Channel list you use for the
RF Extender.
The RF Channel on the RF Extender has to be the same as the RF Channel on
ProntoPro NG.
8 Select the Extender ID in the Extender ID list you use for the
RF Extender.
The Extender ID on the RF Extender has to be the same as the Extender ID on
ProntoPro NG.
Note
9 Tap
The RF settings are saved.
10 Tap
ProntoPro NG will send out RF signals for the selected device.
Note
User Guide
51
Using the Power Features
in the Tools Menu.
.
.
You can use several RF Extenders with your ProntoPro NG. For each RF
Extender you use for your devices, you need to set the RF Channel and the
Extender ID.
The RF Channel is identical for all RF Extenders. The Extender ID is unique for
each RF Extender.
in the 'RF Settings' screen.
in the 'Select IR or RF' screen.
Try to keep ProntoPro NG and the RF Extender away from metal objects, as this
will have a negative impact on the range.
in the upper left corner of the