Setting The Volume Level; Setting The Navigation For Prontopro Ng - Philips TSU7500 User Manual

Customizing ProntoPro NG

Setting the Volume Level

You can set the volume level for the hard buttons as well as for the touch screen
buttons. The volume of the button refers to the loudness of the beep you hear
when you press or tap a button.
Setting the Volume Level of the Hard Buttons
To adjust the volume of the hard buttons, tap
Settings Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time
you press, the volume level increases with one step up to level 3.
Setting the Volume Level of the Touch Screen
To adjust the volume level of the touch screen, tap
first Settings Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time
you tap, the volume level increases with one step up to level 3.

Setting the Navigation for ProntoPro NG

The cursor is used by default to operate your devices. You then navigate the
ProntoPro NG with the touch screen buttons. However, you can also set the cursor
to browse through ProntoPro NG's devices and pages. For more information on
operating the ProntoPro NG with the cursor, see 'Operating ProntoPro NG with the
Cursor' on page 48.
To set the navigation for the ProntoPro NG, tap
second Settings Page:
You can select Cursor Navigation-Off to navigate the ProntoPro NG with the
touch screen buttons.
You can select Cursor Navigation-On to navigate the ProntoPro NG with the
cursor.
User Guide
34
in the first
in the
in the