Philips TSU6000 User Manual page 43

4 Press the action buttons
change the Channel.
The Remote Control offers 4 RF Channels.
Note
5 Tap Accept to save the selected Channel for all devices that work with
RF signals.
-or-
Tap Cancel to return without changing the Channel.
6 Tap Close.
The Remote Control switches back to Use mode. The Remote Control is
configured to operate the devices you have set with RF signals through the
selected Channel.
7 Try out all devices for which you just changed the Channel.
User Guide
43
Getting the Maximum out of it
The Channel (CH) on the RF Extender has to match the Channel on the Remote
Control.
to