Philips TSU6000 User Manual page 40

Getting the Maximum out of it
Therefore, the RF Extender has to be placed near the device you're operating with
the RF Extender's sending eye pointed to the device.
Your devices will always receive IR signals either directly from the Remote Control
or from the RF Extender.
Changing the Remote Control's RF IR Settings
All devices are set up by default to work with IR signals. To be able to operate one
or more devices with RF signals, you have to change the Remote Control's RF IR
settings for those devices.
1 Make sure the Device tab is active.
The Device tab is active when the name of a device is displayed at the right
side of the touch screen
2 Switch to RF IR mode via the Remote
Control icon
The Device menu appears.
3 Select the device for which you want to
change the RF IR settings.
The RF IR settings appear. The red label on the
button
device is currently operated with IR signals.
User Guide
40
.
.
indicates that the selected