Philips TSU6000 User Manual page 16

Getting Started
2 In the Device menu, tap the device you want to operate.
The control panel that was last accessed for this device appears.
Using Touch Screen Buttons
Sending commands
By tapping the touch screen buttons you send commands to the device you have
selected. When you send a command, the Remote Control icon shows
transmitting signals
The name of the active device is indicated on the
Device tab.
Selecting a device without affecting other devices
When you select a device that is programmed with a device action (see p. 27), the
following happens:
• the Remote Control sends commands to the selected device to execute the
device action;
• the control panel of the selected device is displayed.
Sometimes, sending device action commands can cause unwanted behavior of
other devices.
User Guide
16
Currently selected device
Device menu
.