Defining The Brands Of Your Devices - Philips TSU6000 User Manual

Defining the Brands
of Your Devices
The Remote Control uses RC codes to activate devices. Because there are several
brands using specific RC codes, you have to define the brands of your devices.
On the Home panel you find buttons for most common video and audio devices.
When you select a device on the Home panel for the first time, you will notice that
the Remote Control is set up by default to operate Philips or Marantz devices. For
all devices other than Philips or Marantz, you will have to define the brand before
you can operate them with the Remote Control.
1 Select a device on the Home panel.
The following screen appears.
2 When the brand of your device is Philips or Marantz, click No.
The Remote Control switches to Use mode. To operate the device in Use
mode, see p. 15.
-or-
When you want to adjust the Remote
Control to operate with your brand,
click Yes.
The Remote Control switches to Brand mode.
Follow the instructions as described below.
There are three possible scenarios for defining
brands:
• You can select the brand and the code set
of your device.
• You can select the brand of your device and
search the code set.
• You can search the brand of your device.
User Guide
7
Getting Started