Table of Contents
Advertisement
Ethernet (RJ-45)
7.
It provides one 10/100/1000 Base-T Ethernet interface which is used to
connect with a computer to access the network control page or run the
device control tool to modify the network settings, and supports TSL5.0.
The default IP address of AURORA1600-4K is 192.168.1.2.
USB
8.
It provides one USB interface to realize the upgrade and IP restore.
LTC Input (BNC)
9.
It provides one LTC input interface to connect to a LTC timing device, it is
labeled as LTC IN. The LTC timing code is used to time the analog clock
timer or digital clock timer.
Audio Output (3.5mm jack)
10.
It provides one audio output interface, labeled as AUD OUT. Output a pair
of audio signal.
Power Input
11.
It is used to supply AC power. There are two power input interfaces, they
are redundant, and the specification is 100-240V, 50/60Hz, 100W. They
are labeled as PS1, PS2 separately. The corresponding indicators are at
the front panel. If the light is green, the device is powered on, and if the
light is off, the device is powered off.
Only use the adapter and the power cord specified by the manufacture for
your safety！
Pins
Value
1,2
GND
4
Rx+
5
Rx-
7,8
GND
AURORA1600-4K Features
17
Advertisement
Table of Contents
