Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OSEE HSC5831
Summary of Contents for OSEE HSC5831
- Page 1 HSC5831 Converter User Manual...
-
Page 3: Product Information
Product Information Model: HSC5831 Converter Version: V010001 Release Date: March 12th, 2015 Company OSEE TECHNOLOGY CO., LTD. Contact Information Address: No.22 Building, No.68 zone, Beiqing Road, Haidian District, Beijing, China Post Code: 100094 Tel: (+86) 010-62434168 (+86) 010-62434169 Fax: Web: http://www.osee-dig.com/... -
Page 4: Contents
The user manual applies to the following device types: HSC5831 The images of HSC5831 are adopted in the following descriptions. Any of the different specifications between the device types are elaborated. Before reading the manual, please confirm the device type. -
Page 5: Table Of Contents
Contents Contents ......................I Chapter 1 Product Overview ................. 1 Chapter 2 Safety ..................... 3 Chapter 3 Unpack and Installation ............... 7 Chapter 4 Parameter Settings ............... 9 4.1 Management Interface ..............10 4.1.1 STATUS Menu ................12 4.1.2 Parameters Menu ................13 4.1.3 System Menu .................. -
Page 7: Chapter 1 Product Overview
Product Overview Chapter 1 Product Overview HSC5831 is a high quality video converter, the signal of HDMI or DVI can be converted to HD/SD-SDI with high quality. It is mainly applied to the broadcast system, high-speed railway, distance transmission of the military signals, and other fields which require high definitions. - Page 8 Product Overview Functionality Supports conversion from 1080P to 1080i for the convenience of the transmission and monitoring Supports the input signal of DVI resolution WEB page control without fussy installation of control software Adopts the innovative detachable installation part, this unit can be installed on the rack or the wall ...
-
Page 9: Chapter 2 Safety
Safety Chapter 2 Safety FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 10 Safety Warnings: Read, keep and follow all of these instructions for your safety. Heed all warnings. Converter Upgrading of the converter or its accessories are subject to change without notice. Position Do not block any ventilation openings. ...
- Page 11 Safety Power Cord with Adpter Do not defeat the safety purpose of the polarized or grounding-type plug. Do not damage the power cord, place the heavy objects on the power cord, stretch the power cord, or bend the power cord. ...
-
Page 13: Chapter 3 Unpack And Installation
Chapter 3 Unpack and Installation Unpack: When unpacking the components of HSC5831 converter, please verify that none of the components listed in Table 3.1 are damaged or lack. If there is any missing, contact your distributors or OSEE for it. - Page 14 Unpack and Installation As shown in Figure 3-1, connect required cables for signal inputs and outputs. Figure 3-1 the interfaces of the Converter Provide a 12V/2A DC power supply. Connect the power supply to the power interface. Screw the protection parts for power supply. Finally, turn on the power switch, so that the device will be ready for work.
-
Page 15: Chapter 4 Parameter Settings
Parameter Settings Chapter 4 Parameter Settings This chapter will introduce how to set the parameters of the converter in Internet Explorer. Open the Internet Explorer window firstly, and input 192.168.1.200 in the address bar, then, press Enter key, the management interface of HDMI-SDI converter is shown as in Figure 4-1: Figure 4-1 Load the Management Interface ... -
Page 16: Management Interface
Parameter Settings Figure 4-2 Set the IP Address of the Computer You can check or modify the parameters in this management interface, the following will introduce these operations. 4.1 Management Interface Open the management interface as shown in Figure 4.1-1:... - Page 17 Parameter Settings Figure 4.1-1 Management Interface As shown in Figure 4.1-1, the management interface is divided into two parts: Navigation menu list: it shows the navigation menus: Status, Parameters and System. Click the navigation menu, it will show the corresponding settings on the right side. Parameter list: it shows the parameter names, values and operation buttons of the selected navigation menu, as shown in the red rectangle in Figure 4.1-2.
-
Page 18: Status Menu
Parameter Settings 4.1.1 STATUS Menu Click the Status button to show the STATUS menu as shown in Figure 4.1-3, it contains Hdmi input format, Hardware version and Software version. Figure 4.1-3 STATUS Menu The relationships of the menu items and the contents are as shown in Table 4.1-1: Table 4.1-1 STATUS Menu Menu Items... -
Page 19: Parameters Menu
Parameter Settings Signal Supported Video Displayed Displayed Formats Formats Formats Formats 1080I50 1080I50 1080I50 STD_1080I_50 1080P30 1080P30 STD_1080P_30 1080P30 1080P29.97 1080P29.97 STD_1080P_30 1080P25 1080P25 1080P25 STD_1080P_25 1080P24 1080P24 STD_1080P_24 1080P24 1080P23.97 1080P23.97 STD_1080P_24 720P60 720P60 STD_720P_60 720P60 720P59.94 720P59.94 STD_720P_60 720P50 720P50 720P50... -
Page 20: System Menu
Parameter Settings The relationships of the menu items and the contents are as shown in Table 4.1-3: Table 4.1-3 Parameters Menu Menu Items Defaults Range Description whether to convert the none: not convert P to i none signal from 1080P(3G) to converting: signal convert 1080I(HD) Set the channel of audio... -
Page 21: Parameters Operations
Parameter Settings Figure 4.1-5 System Menu The relationships of the menu items and the contents are as shown in Table 4.1-4: Table 4.1-4 System Menu Menu Items Defaults Range Description 192.168.1.200 IP Address Mask 255.255.255.0 subnet mask Gateway 192.168.1.1 gateway Language English English/Chinese language mode... - Page 22 Parameter Settings you can check the parameter settings. Set parameters Here, take setting the Audio input parameter for example. It will describe how to change its value. The settings of the other parameters are as the same, it will not be described any more. Audio input is used to set the channel of audio converting.
- Page 23 Parameter Settings Please keep the power on when restoring the product originals. Please consider it seriously when reset parameters to the product originals by reset operation, because the customized parameters will not be restored any more.
-
Page 25: Chapter 5 Specifications
HD: 1080p 24/25/30Hz;1080i 50/59.94/60Hz; Supported Format 720p 50/59.94/60Hz SD: 480p60, 576p50, 480I60, 576I50 Video Output 2*HD-SDI ;BNC Impedance 75Ω Power 5V~12V DC Control RJ45 Dimensions The description of the product dimensions of HSC5831 is shown as in the following figures:... - Page 26 Error! Reference source not found. Figure 5-1 Rear Panel(Unit: mm) Figure 5-2 Top View(Unit: mm)
- Page 27 Error! Reference source not found. Figure 5-3 Side View(Unit: mm) Specifications are subject to change without notice. ------------------No Text Below------------------...
- Page 29 FOR MORE INFORMATION PLEASE VISIT: http://www.osee-dig.com/ OSEE TECHNOLOGY CO., LTD. No.22 Building, No.68 zone, Beiqing Road, Haidian District, Beijing, China Tel: (+86) 010-62434168, Fax: (+86) 010-62434169 E-mail: sales@osee-dig.com...
Need help?
Do you have a question about the HSC5831 and is the answer not in the manual?
Questions and answers