Chapter 3 Operation and Control ..................6 Control .............................. 6 Setting Jumper ..........................6 LED Indicator ..........................7 Chapter 4 Specifications ...................... 8 Chapter 5 Warranty for osee product ................9 What the warranty covers ....................... 9 What the warranty does not cover ....................9...
Chapter 1 Introduction Overview The DAC6820N/DAC6820N4 is the converter module that can convert Digital audio to Analog audio. It provides one/two balanced or unbalanced AES audio inputs and two/four balanced analog audio outputs. The two modules both have status indicator.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Module Descriptions The Front Part of Module Figure 1-1 shows the board of DAC6820N (4) Fig. 1-1 The board of DAC6820N (4) Back Connector -2 -...
DAC6820N (4) User Manual DAC6820N (4) Fig.1-2 Back Connector of DAC6820N (4) Tab. 1-2 description of DAC6820N (4) Back Connector Item Description AESI 1,AESI 2 Balanced or unbalanced AES audio inputs. For DAC6820N, AESI 2 is invalid. ANALOG AUDIO OUT Balanced analog audio outputs.
The power consumption for module and the maximum power ratings that frame can sustain have to be confirmed before installing the module. In this chapter, the following topics on installation process for DAC6820N (4) are discussed below: Unpacking the module ...
DAC6820N (4) User Manual Follow the following steps to install the module: Step 1:Locate the position for back connector and insert the back connector Step2:Fasten the screw to fix the back connector. Step3:Locate the slot for module. Step 4:Get the module installed in the slot, push the module slightly along the slot, press module again to confirm that the module is installed firmly and then close swivel handle.
DAC6820N (4) User Manual Removing the Module Follow the following steps to remove DAC6820N (4) module: Open the front part of frame. Open the swivel handle to the full. First make sure the frame stands firmly, and then pull the module gently along the slot till out of frame.
DAC6820N (4) User Manual LED Indicator Table 2-4 LED Indicator Function Item Description POWER On: Power is supplied. For the status of “unmasked”, the indicator AUD1 green lights, when the input data is correct. For the status of “unmasked”...
DAC6820N (4) User Manual Chapter 4 Specifications Balanced AES Inputs Number of inputs DAC6820N: 1; DAC6820N4:2 Standard AES3- 1992 (r1997) Connector 3-pin connector (male) Impedance 110 Ω+/-20% Signal level 2 to 7 V pk-to-pk Minimum signal level 200 mV as per AES3...
This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Osee reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer.