Table of Contents
Advertisement
Safety
Safety Guidelines
The following are safety precautions that personnel must understand and follow when using or
servicing this product. These precautions may or may not be included elsewhere in this manual.
1. POTENTIAL SHOCK HAZARD - Repair procedures on PACE products should be
performed by Qualified Service Personnel only. Line voltage parts may be exposed
when the equipment is disassembled. Service personnel must avoid contact with these
parts when troubleshooting the product.
2. To prevent personnel injury, adhere to safety guidelines in accordance with OSHA and
other applicable safety standards.
3. Always use PACE systems in a well ventilated area. A fume extraction system such as
those available from PACE are highly recommended to help protect personnel from
solder flux fumes.
4. Exercise proper precautions when using chemicals (e.g., solder paste). Refer to the Material
Safety Data Sheet (MSDS) supplied with each chemical and adhere to all safety precautions
recommended by the manufacturer.
5. Do not exceed 7 Bar (100 PSI), otherwise damage to equipment, materials, and the operator
could occur.
6. Personnel who handle dispensing materials should wash their hands and face thoroughly
before eating, smoking or using rest room facilities.
7. Proper training should be given to personnel handling these materials.
8. The use of Safety Glasses is recommended when loading the barrels.
©2004 PACE Inc., Annapolis Junction, Maryland
All Rights Reserved
Page 5 of 15
Advertisement
Table of Contents
