General Information; Introduction; Specifications - Pace SODRTEK ST 600 Operation And Maintenance Manual

General Information

Introduction

Thank you for purchasing the PACE SODRTEK
This manual will provide you with the information necessary to properly set up, operate and maintain
your new system. This ST 600 is a microprocessor controlled, automatic liquid dispensing system.
The pressure is fully adjustable for each individual application and the dispensing cycle time allows
for precise dispensing of liquids such as glues, greases, and solder pastes.
The ST 600 system is available in either 115 VAC or 230 VAC versions. The 230 VAC version
system bears the CE Conformity Marking, which assures the user that it conforms to EMC
89/336/EEC.
The 115 VAC version systems conform to FCC Emission Control Standard, Title 47, Subpart B, Class
A. This standard is designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.

Specifications

System Power Source Power Requirements
ST 600
ST 600E
Dispensing Time
Timing Intervals
Repeat Tolerance
Size
Weight
Internal Voltage
Air Input
Air Output
©2004 PACE Inc., Annapolis Junction, Maryland
All Rights Reserved
®
model ST 600 Digital Paste Dispensing System.
Operates on 97-127 VAC, 50/60Hz, 90 Watts maximum at 115 VAC,
60Hz
Operates on 197-253 VAC 50/60Hz, 80 Watts maximum at 230 VAC,
50Hz
0.01-99.99Seconds Adjustable
0.1-9.9Seconds Adjustable
±0.05%
23.8 cm x 15.0 cm x 6.0 cm (9.37" x 5.9" x 2.36")
1.7Kg (3.75 Lbs)
24V DC
35-100 PSI (0.25-0.7MPa)
1-100 PSI (0.01-0.7Mpa)
Page 3 of 15