Table of Contents
Advertisement
Selects a baud rate that is identical with your computer's so that you can connect
Baud Rate
the projector using a suitable RS-232 cable and update or download the projector's
firmware. This function is intended for qualified service personnel.
Disables or enables "Type A connector" 5V power output. To enable this function,
USB Power
select On. Select Off when PointWrite Touch Module is not in use to prevent
Switch
damage.
Returns all of the adjustments you've made for the Settings menu to the factory
Reset Settings
preset values.
System
Language
Sets the language for the On-Screen Display (OSD) menus.
• Monitor Out: Allows the projector to output a VGA signal when it is in standby
Standby
Settings
•
Background
• Splash
Settings
• Menu Type: Switches to the Basic OSD menu.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
Returns all settings to the factory preset values.
Factory
Default
The following settings will still remain: Keystone, Projector Installation, Lamp Timer, High
Altitude Mode, Security Settings, Baud Rate.
Returns all of the adjustments you've made for the System menu to the factory
Reset System
preset values.
30
Menu operation
mode and the PC 1 jack and the MONITOR OUT jack are correctly connected
to devices.
Background:
Sets the background color for the projector.
Screen:
Allows you to select which logo screen will be displayed during
projector start-up.
your last key press.
Advertisement
Table of Contents
