Malfunctions
9. Malfunctions
The malfunctions listed in Table 5 are caused
by mechanical faults and incorrect regulator
sizing. In the simplest case, the functioning
can be restored following the recommended
action. Special tools may be required for re-
pair work.
Exceptional operating and installation condi-
tions may lead to changed situations that
may affect the control response and lead to
malfunctions. For troubleshooting, the condi-
tions, such as installation, process medium,
temperature and pressure conditions, must
be taken into account.
SAMSON's After-sales Service can help
during troubleshooting. Further information
is available in section 11.1.
We recommend removing the regulator from
the pipeline before repairing it.
Tip
SAMSON's After-sales Service can support
you in drawing up an inspection and test
plan for your plant.
Note
Contact SAMSON's After-sales Service for
malfunctions not listed in the table.
36
EB 2723 EN