Springdale Lighting SPT11118 Assembly Instructions

Available languages

ASSEMBLY INSTRUCTIONS:

Item No: SPT11118

1. Place the lamp base on a level surface.

2. Screw column onto base.

Be careful not to twist power cord.

3. Screw socket assembly into the column.

4. Insert harp until it sits firmly into the saddle.

5. Place shade over harp and tighten finial to

secure shade in place.

6. Insert bulb into bulb socket.

Uses (1) Maximum 150WATT, 3Way Type "A" Bulb

(Bulb not included)

Cleaning of your lamp

Unplug lamp, wipe with damp cloth.

Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Revision 09/01/11

Table of Contents

Do you have a question about the SPT11118 and is the answer not in the manual?

Page 1 FOR RETURN SHIPPING PURPOSES: ASSEMBLY INSTRUCTIONS: PLEASE RETAIN ORIGINAL PACKAGING Item No: SPT11118 TO MINIMIZE DAMAGE. 1. Place the lamp base on a level surface. 2. Screw column onto base. Be careful not to twist power cord. 3. Screw socket assembly into the column.
Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL Modelo: SPT11118 PARA REDUCIR DAÑOS MINIMO. 1. Ponga la base en una superficie llana. 2. Atornille la columna a la base. Tenga cuidado de no torcer el cable de eléctricidad.
Page 3 * Guardar estas instructiones para una referencia futura. Hecho en China Revision 09/01/11...