PCB Piezotronics IMI SENSORS EX641B02 Installation And Operating Manual page 44

CSA
IP
GROUPTM
APPLICABLE REQUIREMENTS
CSA C22.2 No. 61010-1-12/
ANSI/ISA 610 10-1 3rd Ed.
(R2017)
CSA C22.2 No. 213 2017/ UL
121201 9th Ed.
CSA C22.2 No 60079-0:2019
CSA C22.2 No 60079-11:2014
UL 60079-0: 2019
UL 60079-11:2014
MAPKINGS
-
Safety requirements for electrical equipment for
measurement, control, and laboratory use Part 1:
General requirements
-
Nonincendive Electrical Equipment for Use in Class I
and TI, Division 2 and Class III, Divisions 1 and 2
Hazardous (Classified) Locations
-
Explosive Atmospheres-Part 0: Equipment-General
requirements
-
Explosive atmospheres Part 11: Equipment protection
by intrinsic safety "i"
Standard for Safety
-
Explosive Atmospheres
-
Part 0:
Equipment
-
General Requirements, Ed. 6
Standard for Safety
-
Explosive Atmospheres
-
Part 11:
Equipment Protection by Intrinsic Safety "I", Ed. 6
The manufacturer is required to apply the following markings:
• Products shall be marked with the markings specified by the particular product standard.
•
Products certified for Canada shall have all Caution and Warning markings in both English and French.
Additional bilingual markings not covered by the product standard(s) may be required by the Authorities Having
Jurisdiction. It is the responsibility of the manufacturer to provide and apply these additional markings, where
applicable, in accordance with the requirements of those authorities.
The products listed are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US for Canada and
US (indicating that products have been manufactured to the requirements of both Canadian and U.S. Standards) or
with adjacent indicator 'US' for US only or without either indicator for Canada only.
Markings are etched directly into the Sensor enclosure body. The following marking details appear:
I.S. models
-
CSA Monogram with C US Indicator
-
Submittor Identification
-
Model Number
-
Serial Number, Date Code or Month and Year of Manufacture
-
Electrical Rating
-
Hazardous Location Designation- As per Product Section
-
Applicable Temperature Code
-
Applicable Ambient temperature range
-
For EXHT and EXHTTO series: DC symbol:
-
Certificate # reference (ie. 2005 1632187 X)
-
Reference to Installation Drawing